|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment.
|
Use as replacement/rebuild kit for TP05060 Toolpro grid punch.
|
Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line firmly in place without damaging the grid finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver.
|
Toolpro Barnacle Display Hanger, Aluminum, White, Suitable for: 1 in Ceiling Grid
|
The Shadowline cutter creates ideal Shadowline or reveal edges on ceiling tiles and acoustical panels. The one-piece all-steel design is comfortable to hold and use. This contractor-proven tool will not only make the most professional looking cuts possible. It will pay for itself on the first day by eliminating wasted tiles due to bad cuts. Blade changes and cutting depth are easily adjusted by hand with no additional tools required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These strong clamps are used for temporarily holding ceiling grid together during assembly and for holding leveling line. They are easily operated with one hand. They are also useful for many jobs around the shop and house.
|
Designed to lock on top of ceiling grid after adjacent ceiling tiles are dropped in for holding down acoustical tiles in drafty entranceways and low security areas. After inserting adjacent tiles slide clip over T-bar until base of clip makes contact with tile. To move or remove clip insert a large flat screwdriver in the top of the clip and turn slightly to open mouth of clip enough to free it from T-bar.
|
Leveling line is a high-strength line that will not sag or stretch. Each Line is 450 ft and unspools from the center core of the tubular casing this prevents tangling and allows you to use only what is needed. This line is used during the layout of the ceiling grid to ensure it remains level during assembly. Use with lever action grid clamps for better results.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is recommended for the strongest attachment.
|
Hanger wire is used to suspend ceiling grid main tees from the overhead structure. Designed for residential applications. The continuous 300 ft roll lets you cut the lengths you want with no waste.
|
This heavy-duty tool easily installs eye lag screws up to 4-1/2 in L as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This grid punch is the most reliable and economical tool for preparing non-standard lengths of ceiling grid for fastening with rivets. Hardened pin will easily pierce 18 ga steel with little effort, allowing one-hand operation while freeing the other hand to hold the material steady. The tool's thin profile and deep throat makes punching holes into awkward and hard to reach corners possible. For optimum results place the steel cup firmly against the back of the material to be punched and squeeze with consistent pressure, bringing the pin into the material. The rubber tip on the punch will protect painted or coated finishes from being marred.
|
Toolpro Eye Lag Screw, Thread Size: 1/4 in, 2 in L, Stainless Steel, Package Quantity: 100 PK, Self-Tapping, Silver, Applicable Materials: Metal
|
The purlin clip tool is used to install spring steel purlin clips. It works well with both Z-clips (diagonal flanges) and C-clips (vertical flanges). The clips may be installed with or without the chain or wire attached.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
|
DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
|
DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.
|
|
|
