|
|
|
|
|
|
|
|
|
|
|
The thermostat plate is what gives it the color. A matching plate is sent with each baseboard heater purchased, which is separate from the thermostat. If they order a white heater, then a white plate is sent that is made to fit over a TBD Thermostat. If they order an ivory baseboard heater, an ivory plate is sent. A single pole thermostat operates off one circuit, this means the power to the unit can only operate in one direction or electrical current. Because of this the single pole thermostat cannot be turned off, but only turned down.
|
Adapter plate allows replacement of all CB Series and MW Series heaters. Opening 14-3/4 in x 6-3/4 in. Overall 21-1/2 in x 12-1/4 in.
|
Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Single Pole: breaks one side of the line. Rated 20 A, 120/240 VAC. Adjustable range 50 to 90 deg F. Recommended for all 120 V units. Mount in standard deep receptacle box. U.L. Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerZone Electric Baseboard Heater fits in small spaces very easily. It has rotary dial controls, tip-over safety shut-off, thermostat control, overheating protection, and a built-in carry handle. This baseboard heater will look great in any room that needs extra heat, as it has a low-profile design.
|
A double pole thermostat is wired directly to the main circuit breaker but will have four wires instead of two. This allows for the thermostat to operate on two separate circuits. Double pole thermostats have an "off" button and can cut off power completely to the heater, even if the temperature drops below the set temperature.
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Double pole, both sides of the line are disconnected in the off position. Recommended for all 240 V units and for additional safety with 120 V units. Mount in standard deep receptacle box. UL listed.
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
This comfort furnace features 2 energy efficient quartz heating elements, which provide soothing infrared heat and a powerful output of 5120 Btu. It's sleek, slim design will fit into any decor and the stay cool cabinet protects against accidental burns and keeps the wall cool. The built-in thermostat, 2 power settings and eco setting allow for maximum comfort while minimizing energy use. Wall mounting kit included.
|
Give your garage, studio, warehouse or event space a big boost of warmth with this PowerZone EH-4604A ceiling mount heater. This commercial heater has a fan-forced design to help disperse heat evenly throughout your space. The ceiling-mounted installation saves you valuable floor space and keeps the unit out of the path of pets and small children.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade 2200 rpm/70 CFM. Powder-coated 20 ga steel front. Rough in dimensions 14-1/2 ft W x 7-1/8 ft H, 3-1/2 ft deep. Single pole built-in thermostat. Unit not approved for ceiling mount applications. Unit can be positioned to allow left, right or top discharge. Grill dimensions of 16-3/4 in W x 7-5/8 in H.
|
Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade, 2200 rpm/70 CFM. Powder-coated 20 ga steel front. Rough in dimensions 14-1/2 ft W x 7-1/8 ft H, 3-1/2 ft deep. Single pole built-in thermostat. Unit not approved for ceiling mount applications. Unit can be positioned to allow left, right or top discharge. Grill dimensions of 16-3/4 in W x 7-5/8 in H.
|
Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High-quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to a tamper-resistant feature. Whisper quiet, vane axial fan that has proven to be successful in other products. Rough-in dimensions 19-15/16 in H x 14-3/16 in W x 4 in D. Surface mounting kit is not included. Decorator ivory finish. UL listed. Built-in single pole thermostat. Surface mounting kit can be purchased from the factory, No. 3310EX33R.
|
|
|
|
|
|
|
|
|
Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High-quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to a tamper-resistant feature. Whisper quiet, vane axial fan that has proven to be successful in other products. Rough-in dimensions 19-15/16 in H x 14-3/16 in W x 4 in D. Surface mounting kit is not included. Decorator ivory finish. UL listed. Built-in single pole thermostat. Surface mounting kit can be purchased from the factory, No. 3310EX33R.
|
|