|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee 1/2 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee 5/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Milwaukee 3/4 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Milwaukee 7/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
|